Differences
This shows you the differences between two versions of the page.
— |
serial [2014/11/30 21:01] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== Iguanaworks Serial Transceiver ====== | ||
+ | |||
+ | IR Receiver and High Powered Transmitter for use with LIRC / WinLIRC via its serial driver. Not much technical detail as device has no 'brain' or firmware,etc. [[http://iguanaworks.net/wp-content/uploads/products/series-transceiver/serial-schematic.pdf|Schematic]] and [[http://dev.iguanaworks.net/wp-content/uploads/2011/08/serial-layout.pdf|Layout]] available to those interested. | ||
+ | |||
+ | ===== Specifications ===== | ||
+ | |||
+ | * Standard Serial Transmitter / Receiver for LIRC / WinLIRC | ||
+ | * ~30 ft transmit range using high power transmit circuit | ||
+ | * Standard 38 kHz IR receiver | ||
+ | |||
+ | |||
+ | ===== FAQ ===== | ||
+ | |||
+ | * [[:serial#WillyourdeviceworkwithaUSB->SerialAdapter|Will your device work with a USB->Serial Adapter?]] | ||
+ | |||
+ | === Will your device work with a USB->Serial Adapter? === | ||
+ | |||
+ | No. It will not. Our serial device does not talk RS232, as required by USB->Serial adapters, and doesn't even use the Transmit (TX) and Receive (RX) pins, but the DCD and DTR lines. Why? That's the standard for the LIRC serial devices (see [[http://www.lirc.org/transmitters.html|Serial Port Transmitters]] and [[http://www.lirc.org/receivers.html|Serial Port Receivers]] if you really want all the details). | ||