Differences
This shows you the differences between two versions of the page.
— |
usbir:raspberrypi [2017/10/22 12:59] (current) bluey created |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== IguanaIR on a Raspberry Pi ====== | ||
+ | |||
+ | We no longer maintain a debian repository for the armhf architecture used by the Raspberry Pi. However, our software can easily be compiled into a proper debian package but by using the following instructions. We are assuming you are running Raspbian on your Raspberry Pi. | ||
+ | |||
+ | First make sure everything is up to date on the your Pi, and then install some necessary packages by running: | ||
+ | <code> | ||
+ | sudo apt update | ||
+ | sudo apt upgrade | ||
+ | sudo apt install devscripts | ||
+ | </code> | ||
+ | |||
+ | Then grab the latest IguanaIR source tarball from https://github.com/iguanaworks/iguanair/releases. Unpack the file with | ||
+ | <code> | ||
+ | tar -xzf iguanaIR-1.2.0.tar.gz | ||
+ | </code> | ||
+ | Make sure your terminal is the in same directory as you downloaded the source tarball. Also change the name to match the version of your file. | ||
+ | |||
+ | Go into the new directory with the code (again change name to match version): | ||
+ | <code> | ||
+ | cd iguanaIR-1.2.0 | ||
+ | </code> | ||
+ | |||
+ | Now install everything necessary to compile the package: | ||
+ | <code> | ||
+ | sudo mk-build-deps --install debian/control | ||
+ | </code> | ||
+ | |||
+ | Now we are ready to compile the package: | ||
+ | <code> | ||
+ | dpkg-buildpackage -uc -us | ||
+ | </code> | ||
+ | That's it. The packages should be one directory down. You can install them with | ||
+ | <code> | ||
+ | cd .. | ||
+ | sudo dpkg -i *.deb | ||
+ | </code> | ||