Differences

This shows you the differences between two versions of the page.

Link to this comparison view

igclient:receiving [2014/11/30 21:01]
igclient:receiving [2014/11/30 21:01] (current)
Line 1: Line 1:
 +====== igclient Receiving ======
 +
 +The igclient command provides a little functionality for receiving signals. ​ In addition to the listed commands the daemon also supports the IG_DEV_RAWRECVON that is not currently supported by the igclient executable.
 +
 +===== --receiver-on =====
 +
 +Enable the receiver on the USB device. ​ If necessary, this sends a IG_DEV_RECVON message to the device causing the firmware to begin recording and streaming signals back to the PC.
 +
 +===== --receiver-off =====
 +
 +The user may also explicitly disable the receiver using this argument that **may** send a IG_DEV_RECVOFF to the device. ​ If other clients are currently receiving signals from the device it will be left in the receiving state, although this client instance will no longer receive incoming signals.
 +