Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
igclient:sending [2019/05/08 10:09]
bluey
igclient:sending [2019/05/08 10:13] (current)
bluey [--set-carrier======carrier (kHz)]
Line 37: Line 37:
 Check the carrier frequency for transmits. ​ The carrier frequency is adjustable given supported versions of the firmware (verison 0x0101 or higher) and driver (0.91 or higher). ​ This is the frequency at which the LEDs are flashed. ​ For example an IR pulse of 1000us actually consists of the LED flashing on and off at 38kHz for 1000us. ​ The default is 38kHz, and is compatible with most devices, however, frequencies from 25kHz to 100kHz are supported. Check the carrier frequency for transmits. ​ The carrier frequency is adjustable given supported versions of the firmware (verison 0x0101 or higher) and driver (0.91 or higher). ​ This is the frequency at which the LEDs are flashed. ​ For example an IR pulse of 1000us actually consists of the LED flashing on and off at 38kHz for 1000us. ​ The default is 38kHz, and is compatible with most devices, however, frequencies from 25kHz to 100kHz are supported.
  
-===== --set-carrier======carrier (kHz) ==+===== --set-carrier==carrier (kHz) ====
 Users can set the frequency used for transmission. ​ Please read the documentation for --get-carrier for details. Users can set the frequency used for transmission. ​ Please read the documentation for --get-carrier for details.